EZO™ Dissolved Oxygen Circuit

#EZO-DO
Patent Protected

You may also like…

$53.99 USD

Add & Save

4+ Units

$51.99

10+ Units

$49.99

25+ Units

$44.99

50+ Units

$39.99

100+ Units

$29.99

Until you’re faced with the challenge, it’s hard to see why anyone would care about dissolved oxygen. But, here you are.

Accurately calculating the D.O. of water is quite difficult. Once all the mathematical calculations are done, it takes hundreds of chemical titration tests to confirm that the readings are correct over the full scale. The process is agonizing. Fortunately, you don’t have to do any of that. The Atlas Scientific EZO-DO Circuit gives you accurate D.O. readings in Mg/L and percent saturation. Using its temperature, salinity, and pressure compensation features, you can be sure the readings are correct no matter where in the world you are.

ReadsDissolved Oxygen
Range0.01 − 100+ mg/L
0.1 − 400+ % saturation
Accuracy+/– 0.05 mg/L
Response time1 reading per sec
Supported probes Any galvanic probe
Calibration1 or 2 point
Temp. compensation Yes
Salinity compensation Yes
Pressure compensation Yes
International standardISO 5814 compliant (determination of dissolved oxygen)
Data protocol UART & I2C
Default I2C address 97 (0x61)
Operating voltage 3.3V − 5V
Data formatASCII
Circuit dimensions 13.97mm x 20.16mm (0.55″ x 0.79″)
Weight1.77 grams

Until you’re faced with the challenge, it’s hard to see why anyone would care about dissolved oxygen. But, here you are.

Accurately calculating the D.O. of water is quite difficult. Once all the mathematical calculations are done, it takes hundreds of chemical titration tests to confirm that the readings are correct over the full scale. The process is agonizing. Fortunately, you don’t have to do any of that. The Atlas Scientific EZO-DO Circuit gives you accurate D.O. readings in Mg/L and percent saturation. Using its temperature, salinity, and pressure compensation features, you can be sure the readings are correct no matter where in the world you are.

ReadsDissolved Oxygen
Range0.01 − 100+ mg/L
0.1 − 400+ % saturation
Accuracy+/– 0.05 mg/L
Response time1 reading per sec
Supported probes Any galvanic probe
Calibration1 or 2 point
Temp. compensation Yes
Salinity compensation Yes
Pressure compensation Yes
International standardISO 5814 compliant (determination of dissolved oxygen)
Data protocol UART & I2C
Default I2C address 97 (0x61)
Operating voltage 3.3V − 5V
Data formatASCII
Circuit dimensions 13.97mm x 20.16mm (0.55″ x 0.79″)
Weight1.77 grams

You may also like…

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.