1/2″ Pre-Filter

#Com-201F

You may also like…

$24.99 USD

Add & Save

4+ units

$23.75

10+ units

$23.10

25+ units

$22.50

This pre-filter is intended to be used alongside the Atlas Scientific 1/2” flow meter.

If water with particulate matter will be passing through the flow meter, a pre-filter of at least 80 microns must be used. The blades of the paddle wheel can become jammed by debris if you are not using a pre-filter. Jammed paddle wheel blades will not damage the flow meter; however, it will not be possible to get accurate flow readings until the blockage has been removed.

• 80 Mesh stainless steel pre-filter (178 microns)
• 1/2” Female NPT Input/Output
• Max pressure of 861 kPa (120 PSI)
• Max temp 100°C (212°F)

This pre-filter is intended to be used alongside the Atlas Scientific 1/2” flow meter.

If water with particulate matter will be passing through the flow meter, a pre-filter of at least 80 microns must be used. The blades of the paddle wheel can become jammed by debris if you are not using a pre-filter. Jammed paddle wheel blades will not damage the flow meter; however, it will not be possible to get accurate flow readings until the blockage has been removed.

• 80 Mesh stainless steel pre-filter (178 microns)
• 1/2” Female NPT Input/Output
• Max pressure of 861 kPa (120 PSI)
• Max temp 100°C (212°F)

You may also like…

Scroll to Top

To track your order please enter your Order ID in the box below and press the "Track" button. This was given to you on your receipt and in the confirmation email you should have received.